Posts Tagged “Ducati”

KTM, Suzuki, Ducati and Triumph owners email their thoughts on the difference our ECU remap has made…

0 Comments Posted March 8th, 2017 in Ducati, ECU Remap, KTM, Suzuki, Triumph.

Our customers, on the whole, love their bikes (which is why they bring ’em to us…) and are also a literate bunch! Which is useful, because feedback – good or bad – is useful. What follows is a small selection of owners’ collective thoughts on their Ducati Scrambler, KTM 990 Adventure, Triumph Bonnie and Suzuki […]

Tags: , , , ,

Ducati 1098/1198 complete BSD Engineering gearbox – built tough to survive the use of a quickshifter on the road!

2 Comments Posted December 14th, 2016 in Ducati, BSD Engineering, Heavy duty gearbox.

We decided to manufacture our own gearbox for the 1098/1198 because as stock they’ve proven quite weak. In short, they chew their dogs off! Which means they jump out of gear. A lot of bikes we’ve seen have used a factory-fit quickshifter; the trouble here is that errors can be made on upshifts on the […]

Tags: ,

2012 Ducati Multistrada with Mivv exhaust ECU remap – beautiful job!

Posted March 31st, 2016 in Ducati, ECU Remap.

They’re queuing up at the door! This second Ducati 1200 Multistrada we remapped recently couldn’t have been more different than the first; it turned out beautiful. We plugged in to the ECU, sorted out the emissions nonsense (lambda switch off, secondary air etc) and then sorted the fuelling. Generally, these engines run very lean and […]

Tags: , ,

Ducati 1200 Multistrada ECU remap – halted midflow because of suspected throttle body issues…

Posted March 29th, 2016 in Ducati, ECU Remap.

This Ducati Multistrada came in for an exhaust change followed by ECU remap. Its owner is a regular customer who’s been coming to us for years and his words were; “Can you just liven it up a bit, get the best out of it maybe…?” He’d bought a sorted full exhaust system (Leo Vince tubes and Termi’ […]

Tags: , ,

Ducati 600 Pantah engine rebuild – a labour of love, and not for the faint-hearted…

Posted March 25th, 2016 in Ducati.

Now in amongst a sea of shiny new bikes getting their ECUs attended to there’s always room for a bit of nostalgia. This lovely bit of air-cooled architecture is a 600cc Ducati Pantah engine, out of a TT2 chassis. The owner races a Honda CB450 at classic events and wants to move on and, having […]

Tags: ,

180bhp Ducati 1198R engine strip and rebuild after a full season (and a bit) wide open…

Posted January 25th, 2016 in Ducati, Engine Tuning.

This engine belongs in a race Ducati owned by a local team. We’ve been looking after and tuning their motors for years (as we do many) and this time of year our engine shop is flat out with rebuilds ready for the coming season. The team had some solid results last year – finishing third […]

Tags: , ,