Miscellaneous

Bridgeport Interact

Capability: BT40 Taper

Capacity: 400mm x 200mm bed

bridgeport interact

Bridgeport Interact

Herbert Pillar Drill

Capability: Dual spindle auto feed

Capacity: Drilling and tapping as necessary

Herbert Pillar Drill

Ward 2DB Capstan Lathe

Capability: Collet Chuck

Capacity: Round, hexagon and square up to 35mm

ward 2db capstan lathe

Ward 2D Capstan Lathe

Long Bed Pillar Drill

Capability: Drilling/tapping

Capacity: 1500mm

Bike File

2010 Triumph Sprint ECU Reprogram

The issues with this bike mainly concern power and power delivery off the bottom especially two-up. It’s been back to the dealer and had the latest factory tune, but the owner wants a little more. First job? Isolate the Lambda sensor and cap off the emissions unit. The bike was then put on the Dyno and we reprogrammed the stock ECU; fuelling at the bottom end has been richened up, taking away the ‘hunting’ snatchiness. Fuelling all the way through the rev range has been optimized and the ignition curve trimmed.
2009 Yamaha R1 Road to Race

To upgrade to race spec we’ve fitted an Öhlins rear shock and MCT have modded the front forks. The engine’s been out and we’ve adjusted the cam timing, ported and skimmed the cylinder head and we’re fitting a set of BSD Performance adjustable bellmouths. It’s also having a YEC race loom and ECU, plus quickshifter.

News