MV Agusta

MV Agusta 800 F3 ECU remap and Zard exhaust fit equals 140 beautiful horsepower at the rear wheel!

1 Comment Posted September 16th, 2016 in ECU Remap, MV Agusta.

We’ve known the owner of this MV a little while (he’s Dodgy Dave the car salesman, according to Gill) and looked after several of his bikes over the years. He bought it and (in his own words) “is a fast man…” He reckoned it was ticking a lot of boxes but didn’t quite have what […]

Tags: ,

MV Agusta F4 312 booked in for a 3,000 mile service and ECU remap for good measure…

Posted March 30th, 2015 in ECU Remap, MV Agusta.

A nice little job, even if MVs like this – on the stock ECU – can be a little tricky. We’ve done a few now and know they’re not simple or straightforward and mostly owners complain of a really snatchy low-down power delivery (and when they stand idling you can hear ’em go woh-woh-woh…). While […]

2001 MV Agusta 750 F4 Power Commander PC III set up – helping an underpowered ECU do its job

Posted June 13th, 2014 in ECU Remap, MV Agusta, Power Commander.

This 2001 MV Agusta 750 F4 arrived with an old serial-port Power Commander PC III to set up. We worked on these years ago but the problem now is map compatibility to make changes. So we had to get Dynojet UK to supply us with a ‘zero’ map to load in and away we went. […]

MV Agusta F4 battery mix-up!

Posted April 8th, 2013 in MV Agusta, Workshop Tips.

This is a salutary tale of how the simplest things can (nearly) become big things… in BSD Office Queen Gill’s own words: “This F4 came in as a non-starter. On further investigation Mark found that the customer’s friend had put a new battery on the wrong way round. Mark then also methodically checked the continunity […]

MV Agusta F4 Power Commander and ECU set-up

Posted March 11th, 2013 in ECU Remap, MV Agusta, Power Commander.

This MV F4 is in mint condition and done absolutely nothing stood in somebody’s front room most of its life. The chap who bought it felt it wasn’t running well and he was right; the Power Commander already fitted wasn’t well set-up. Mainly because the TPS (Throttle Position Sensor) input on the PC had been […]

MV Agusta Brutale 1078 ECU remap

Posted January 13th, 2012 in ECU Remap, MV Agusta.

The chap who owns this MV is Italian himself, and phoned us before Christmas to talk about an ECU remap. He’d been unhappy with its savage throttle response for sometime, a mate of his had had a fiddle with it but to no avail. With the bike here we rode it – and found it […]

MV Agusta Brutale 920 ECU remap

Posted December 16th, 2011 in ECU Remap, MV Agusta.

An MV Agusta Brutale 920, owned by one of our regular customers (we’ve set-up. ECU re-mapped and Dyno’ed pretty much every bike he owns, from a Paul Smart Replica to 748 and 1098). He bought the Brutale because he’s looking to do a few track days on it next year and likes this style of […]