2010 Triumph Sprint ECU Reprogram
Bike
2010 Triumph Sprint
Why’s it in?
As stock the owner’s not happy with the bike’s performance…
Our treatment
The issues with this bike mainly concern power and power delivery off the bottom especially two-up. It’s been back to the dealer and had the latest factory tune, but the owner wants a little more. First job? Isolate the Lambda sensor and cap off the emissions unit. The bike was then put on the Dyno and we reprogrammed the stock ECU; fuelling at the bottom end has been richened up, taking away the ‘hunting’ snatchiness. Fuelling all the way through the rev range has been optimized and the ignition curve trimmed.
The result…
We’ve gained 7bhp at the bottom – which is what the owner wanted – and 4-5bhp at the top, which he wasn’t bothered about so much, but has got anyway! Check the Dyno curves – the stock bike is in blue, the BSD Performance tune red.
Bike File
-
2010 Triumph Sprint ECU Reprogram
The issues with this bike mainly concern power and power delivery off the bottom especially two-up. It’s been back to the dealer and had the latest factory tune, but the owner wants a little more. First job? Isolate the Lambda sensor and cap off the emissions unit. The bike was then put on the Dyno and we reprogrammed the stock ECU; fuelling at the bottom end has been richened up, taking away the ‘hunting’ snatchiness. Fuelling all the way through the rev range has been optimized and the ignition curve trimmed.
-
2009 Yamaha R1 Road to Race
To upgrade to race spec we’ve fitted an Öhlins rear shock and MCT have modded the front forks. The engine’s been out and we’ve adjusted the cam timing, ported and skimmed the cylinder head and we’re fitting a set of BSD Performance adjustable bellmouths. It’s also having a YEC race loom and ECU, plus quickshifter.
